Broilers

Heating Systems

The LANDMECO Calori-Air heating system is specially designed for use in poultry houses or other types of livestock housing in which there is much dust and/or high heating requirements. The heater ribs are therefore more widely spaced than is normal for similar heaters. Also, the fan has a total of 10 blades, ensuring that the Calori-Air is very quiet.

 

Ventilation Supplier

LANDMECO recommends that the final solution be designed in cooperation with the supplier of the ventilation system.

CALORI-AIR

Exceptional Output

Heating surfaces are designed on the basis of the latest heating surface technology, and thus extremely efficient in relation to element size.

 

Easy Cleaning

The fan unit is hinged on the heating element so it can be swung completely open. This allows easy access to the heating surface and housing for clean­ing purposes. The widely spaced ribs of the heating surface also facilitate cleaning.

INSTALLATION POSSIBILITIES

Traditional Heating

Is recommended as it provides the best possible heat distri­bution and thus ensures dry litter. As heaters can be raised and lowered by means of a winch, it provides exceptional air circulation. This Calori-Air is available with two different dis­tributor plates respectively in galvanized steel or fiberglass.

 

Gable Heating

Gable heating with two air heaters is suitable for use in short houses up to 40-50 metres. (131.23 – 164.04 ft). Pipes are located on side walls. LANDMECO recommends that this solution is supplemented with air circulation fans, to ensure a suitable climate and dry litter throughout the entire unit.

 

Balance Heating

Balance heating with two air heaters is suitable for use in housing units of up to 80-90 metres (262.47 – 2195.28 ft). Cleaning is easy as the heaters are mounted on swivel arms. This system provides good air circulation.

Balance heating is also available with a 201 cm (6.5945 ft) wall bracket.

 

Balance Heating, DB

The conditions described under balance heating also apply here. In this system, however, two air heaters are installed on each side wall because of greater housing unit length. This solution is typi­cally used in long housing units of up to 100-110 (328.08-360.89ft) in length.

Balance, db heating is also available with a 84 cm (2.7559 ft) wall bracket.

 

Single-Sided Heating

In this system, air heaters are only installed on one of the side walls. The system is suitable for housing units of up to 80-90 meters (262.47-295.28 ft).

The main advantage of this solution is that the boiler room can be positioned in close proximity to both air heaters, thus eliminating the need for extensive piping and making the system both simpler and cheaper.

Technical specifications

Heating element thickness 91 mm (3.5827 inches)
Heating element material Copper tubes and seawater resistant aluminum
Weight excl. water 74 kg (163.1421 lb)
Fan motor 0,55 kW, 900 rpm clixon incl. Other motor specifications are available on request!
HxWxD 880x760x680 mm (34.6457×29.9213×26.7717 inches)
HxWxD with extension 880x760x920 mm (34.6457×29.9213×36.2205 inches)
Water back pressure 0.16 bar (2.3206 psi)
Connection 5/4” BSP
Number of circuits 7

Digital resources

Brochure